Remove Car Wax From Moldings
Plastic and rubber molding on your car deserves as much loving care as the paint job, but you can't use the same products to do it. If you are prone to accidently getting car wax on the trim, you've probably noticed that it turns into a white haze over time and it doesn't come off with soap and water. There are plenty of products available to clean it up, and everybody has their preferences, but you can get rid of that haze and restore that brand new look with a little effort.
Instructions
1. Use peanut butter and a toothbrush for a low-tech solution. Choose the creamy, not the crunchy variety. Work the peanut butter into the cloudy area with the toothbrush briskly, and let it sit until it starts to dry. The peanut butter will develop a skin--not unlike car wax--when it's drying. Wipe it away with a microfiber cloth. Microfiber is far superior to cotton rags because they leave no lint behind. You may need to use a little water from the hose, as the peanut butter can get a little messy.
2. Use Wax Blaster on stubborn stains. It comes in a bottle with a built-in sponge applicator. Rub the applicator on the stained trim, wait a few seconds, and wipe away the excess with your microfiber cloth. Wax Blaster is safe for plastic and rubber, and its non-corrosive, so it won't hurt the paint if you over-apply and touch the finish.
3. Keep the trim looking new with Meguiar's Gold Class Trim Cleaner. Meguair's is the choice of auto geeks the world over. The Gold Class wipes away wax residue, but it's more for general cleaning and protecting, so it's a good finishing step after you use the Wax Blaster.
