With a little love, die-cast cars can be restored to like-new appearances.
Restoring die-cast cars is a fascinating and sometimes profitable hobby. If you are a keen die-cast vehicle collector, the satisfaction of returning a well-loved and well-used vintage model to its former glory is worth the effort. You might also find that your reputation for restoring die-cast vehicles spreads and you could start a rewarding niche business based on your skills.
Instructions
1. Remove the base plate by drilling into the rivet using 1.5 mm bit. Open the hole farther with the 2 mm bit and remove the head of the rivet with the 6 mm bit. The base plate should come away easily.
2. Use your small file to remove the burrs (ends) of the axles if the axle and wheels have not already separated from the base plate.
3. Remove all the paint from the model using paint stripper or caustic soda. Refer to the manufacturer's instructions and wear protective gear, as these products are dangerous if splashed in eyes or on skin. Use the wire brush to remove paint from crevices. Rinse the model parts thoroughly in clean water and allow to dry.
4. Avoid handling the parts with bare hands before painting. Spray the individual parts with primer in a well-ventilated area. Leave to dry. Spray the top coat. Remember to also paint the base plate; black is recommended for this. Allow to dry before applying lacquer. Note that lacquer may not be required on certain types of top coat. Refer to the manufacturer's directions.
5. Reassemble the model. You will have to create a burr to prevent the wheels from slipping off the axle. Tap the ends of the axles with the small hammer after replacing the wheels.
6. Replace the base plate using new rivets. Use a dab of strong glue to secure the rivets. Finish the model by painting headlights, bumper and other details with silver paint.
